Cell Phone Booster - Wilson 801280 AG Pro 75 Building System

Product Description

This dual-band 75dB (800/1900) system uses Wilson's largest dual-band building amplifier, Wilson 801280 AG Pro 75. The complete system has been designed to broadcast an improved cell signal into multiple rooms in homes and buildings. Broadcast distance will vary depending upon outside cell signal strength and carrier frequency. Interior and exterior antennas should be separated a minimum 50+ feet to avoid oscillation between antennas. This system requires installation.

Click Here to view additional AG Pro Systems on our main website.

Components in this 75dB dual-band platform:

Wilson 801280 AG Pro dual-band amplifier
Inside Antenna (ceiling dome or wall panel)
Outside Antenna (Omni-directional or directional)
Coax from amplifier to outside antenna
Coax from amplifier to inside antenna
Universal J-Pipe Antenna Mount

Note: Coax and antennas in this system are not Wilson products, they are Powerful Signal components.

The new Wilson 801280 AG Pro has the ability to manually adjust each frequency, 800Mhz and 1900Mhz with a separate control knob. This easy-to-use adjustment method makes system setup and operation easy and simple to understand.

Indicator lights on the amplifier are used to help adjust the amplifier during setup. Red lights indicate error conditions, which means the amplifier gain (broadcast power) needs to be turned down. Green lights indicate the amplifier is operating without any errors. Wilson SMART technology turns the amplifier off if any error conditions are detected.

Wilson AG Pro 801280

Outside antenna needs to be mounted on the roof of your building. Outside antennas are designed to be mounted on a pole (max 2" diameter) using U-bolts. Coax needs to be run from the outside antenna to the amplifier. The amplifier can easily be mounted on a wall in an equipment, utility, or storage room. The inside antenna needs to be mounted on a ceiling (dome) or wall (panel). Coax needs to be run from the inside antenna to the amplifier. Standard wall plug power is required near the amplifier. Antennas do not require power.

Coverage Area

Inside coverage distance varies depending upon outside signal strength, carrier frequency (800 or 1900Mhz) and interior obstacles. The Wilson 801280 AG Pro has been designed to provide approximately 500 to 1,000 sf of coverage in low signal areas (1 bar outside) and up to 10,000 sf in strong signal areas (4-5 bars outside). Note: These calculations are for 1900Mhz. 800MHz will provide more coverage. Please consult with Powerful Signal to determine expected coverage area for your situation.

Antenna Separation

Exterior and interior antennas need to have the proper separation. This is usually about 60+ feet depending upon several variables.

Obstacles (metal, concrete, etc.) between antennas
Difference in height between antennas. Vertical separation is very effective.

Contact Powerful Signal for more information regarding antenna separation. We will help you design your system properly.

Wilson 801280 AG Pro 75 Amplifier The Wilson 801280 is Wilson's largest dual-band (800/1900MHz) cell signal repeater for buildings. There is 70dB of gain for 800MHz and 75dB of gain for 1900MHz. Amplifier gain can be adjusted for both 800MHz and 1900MHz. This adjustability enables the amplifier to be easily configured in many different building scenarios.	Top View
Exterior Antennas A choice of two different exterior antennas are offered. 5dB gain Omni 22" fiberglass 9dB gain directional The omni antenna collects signal from 360 degrees, all directions. This antenna is generally recommended, and it works well in most situations. The directional must be pointed in the direction of the cell tower(s). This antenna works best when there is a good line-of-site to the cell tower or the terrain is mainly flat or low rolling hills. Not recommended in low spots or dense forested areas. Both antennas work with 800/1900MHz carriers. Mounting hardware is included and installation is required. A J-Pipe Universal Antenna Mount is included with the system. This mount allows the exterior antenna to be mounted on either a wall or the roof.	Omni-Directional Antenna	Directional Antenna J-Pipe Universal Antenna Mount
Interior Antennas A choice of two different interior antennas is also offered: Omni ceiling mount dome Directional wall mount panel The dome is recommended in most situations when an attic or dropped ceiling is available. A panel is recommended in homes with vaulted ceilings and situations where antennas cannot be mounted on the ceiling.	Dome Antenna	Panel Antenna
Coax This system provides two lengths of 400 low loss coax. One length is used from the amplifier to the interior antenna. The other length is used from the amplifier to the exterior antenna. Select lengths that best fit your installation environment. Remember: each foot of coax is signal loss, so don't just get the longest length. Figure what you need and select the length that best fits. Note: *Never* coil excess coax. It will cause problems.